Careers Contact Downloads |

Food Processing Software Solutions

Software

Home / Archives for Software

HJ Nolan Salmon Filleting Yield Control System

HJ Nolan Ltd have been in business for 95 years, since 1912. The company sells premium seafood products worldwide, mainly smoked salmon, under the well-known ‘Nolans Seafoods’ brand. Today the company employs almost 300 people across its two Seafood processing facilities in Dublin, Ireland and Aberdeen in Scotland.

HJ Nolan approached Emydex Technology and SF Engineering in 2014, with a request to commission a new salmon filleting and trimming line from SF Engineering, integrated to an in-line real-time Yield and Efficiency reporting software system from Emydex Technology.

Sean Carolan, IT Manager with HJ Nolan’s in Dublin explains the background to the project, “before the Emydex and SF Engineering solution was implemented, all our salmon filleting was done manually. This resulted in us being unable to calculate our yields until the end of the working day, and this calculation was done with pen and paper. This process was time consuming and often lead to inaccuracies and mistakes. As our production started to ramp-up, we found it increasingly difficult to manage this process, and it became necessary to find a way to automate this process.”

Automated Yield Reporting

SF Engineering and Emydex set to work with Nolans to design and build the end-solution required. This exercise resulted in a SF Engineering salmon filleting & trimming conveyor line, complete with an In-feed holding bin, de-heading station, weigh hopper and a distribution conveyor that feeds the salmon to six salmon filleting operators working on the line. Each individual operator station consists of a buffer hopper, a holding hopper, a trimming table, an offal chute and a reset button.

SF Engineering Salmon Filleting and Trimming SystemSF Engineering Salmon Filleting and Trimming System

To operate the system, each salmon-filleter working on the conveyor line first presses their reset button. This triggers the holding hopper to retract, and a new salmon falls into the hopper from the buffer hopper. The filleter then removes the fish to complete their trimming tasks, and once completed, places the fillet back onto the magenta weighing conveyor. The conveyor records the weight of the fish, and then waits for a free space on the takeaway conveyor. Once free, the conveyor sends the fish off to the pin-bone machine. When the operator’s holding-bin is emptied, the operator presses the reset button, starting the whole process all over again.

Cloud-Hosted or On-Premise

During each operation cycle, Emydex’s Data Capture System (DCS), captures each individual filler’s production data, and calculates the batch yield in real-time. Sean Carolan explains “the Emydex software system allows us to capture accurate yield data; weight-on versus weight-off, as well as production throughput; time-on versus time-off, from each individual filleter in real-time. This information is stored in a central cloud-hosted Emydex database, that can be viewed by both operators on the line, as well as our production supervisors on an industrial monitor running Emydex in the factory.

Real-Time KPI Reporting

Displaying production data and KPIs as they are happening in real-time, tends to have a motivational effect on the filleters working on the line, and improves operator productivity. Emydex production reporting can also be accessed on client PCs in the back-office, as well as anywhere around the world via a smart-phone, given the system is hosted in the cloud”.

On-floor Production reporting monitor displays individual filleter yields and throughputs accurately in real-timeOn-floor Production reporting monitor displays individual filleter yields and throughputs accurately in real-time

Carolan Continues “The ability to export accurate information instantly from the Emydex system, has greatly improved the process by which the filleters are paid. Before the implementation of the Emydex system, the production supervisor would have had to manually calculate each filleters weights and rate of pay. This information can now be exported and sent directly to our accounts department. The individual yield of each filleter can now be much more closely monitored by their supervisor. This allows us to insure each filleter is maintaining a satisfactory yield throughout the day.”

Traceability Reporting

“In addition to Yield and efficiency reporting, Emydex is also recording and reporting on food chain traceability throughout the production process” outlines David McMahon, Emydex CEO. “traceability details recorded for each batch include the Emydex ITN (Internal Traceability number), Production run, Supplier, Harvest Number, Harvest Date, Product, Species and size. Same as for production reporting, traceability reporting is available instantly and accurately, from any device connected to the central database in the cloud. Optionally, the system can be hosting on-site/on-premises if required”.

Customer Support

Sean Carolan concludes “Emydex offered unwavering support to Nolans from the onset of this project. Throughout the initial design process, the implementation and the aftersales support, Emydex has maintained an unparalleled level of support and professionalism. It’s always a pleasure dealing with anyone from the Emydex team, and I wouldn’t hesitate to recommend them to anyone in the market for reliable, well-supported factory floor software solution.”

 

About Emydex Technology: Emydex Technology is a leading supplier of Traceability reporting and Production Management Software systems to Meat, Fish and Food Processors around the world. Over 100 food processing factories, operating across 4 continents, use Emydex factory floor software systems to monitor, control and report on their Production yields, stocks, traceability, food quality, safety and compliance.

About SF Engineering: SF Engineering is an award-winning Irish engineering company that designs and manufacturers food processing and packaging solutions for the food industry globally. The company’s Engineering solutions are operating in meat, fish and food processing companies throughout Europe, Russia, the Middle East and Chile

About Emydex & SF Engineering: Emydex Technology and SF Engineering have worked on a number of joint software/hardware integration projects for shared customers over the past number of years. In addition to the salmon filleting line solution delivered to HJ Nolans, other joint projects including Emydex integration to an SF Engineering pork primal grading line, as well as integration to RFID controlled SF Engineering conveyor systems operating in a lamb Processing plant in the UK.

For enquiries contact sales@emydex.com or call Emydex on contact us

Request a Demo

Traceability enabled in Ireland’s Largest Pig Processor

Rosderra Irish Meats Group is the largest pork processing company in Ireland. The group processes over 1.5 million pigs per annum across its two state-of-the-art processing facilities at Edenderry, Co. Offaly, and Roscrea, Co. Tipperary. In addition, Rosderra has a speciality Meat Ingredients facility in Clara, Co. Offaly, a Pork-Curing facility in Jamestown, Co. Leitrim, and a Cooked Meats facility in Stradone, Co. Cavan.

Rosderra approached Emydex in 2014 to replace their existing traceability and production control systems operating across the group approaching end-of-life. After winning a competitive tender, Emydex was awarded the contract to supply a new factory floor data capture IT solution that operates door-to-door across the group’s four main operating plants. All production processes were to be covered, including weighbridge integration, lairage, grading, primal deboning, further processing, packing, order picking and dispatch, stock, yield management and traceability reporting.

Split into eight distinct project phases, the project also included implementing Emydex’s Cold Store system into Rosderra’s Cold Store facility in Jamestown and tight integration with third-party warehouse management systems operating in external cold stores utilised by Rosderra’s production plants.

As part of the initial project phases, Emydex worked with Rosderra’s IT integration partner to build robust interfaces to the group’s SAP system. Integration points were built using AS2 and XML transfer files to allow Emydex to pull products, materials, and customer files from SAP, as well as Customer Sales orders destined for both Rosderra production sites and third-party cold stores, and later send updated Stock data back to SAP for stock valuation and available-to-promise purposes.

After completing the roll-out of Emydex’s Packing and Warehouse Management systems to Rosderra’s four operating plants in early 2016, the focus shifted to the Boning Hall operations in Edenderry and Roscrea. These project phases included implementing Emydex’s boning hall systems for cutting, boning, further processing, and Yield Control. Yield Reporting from Emydex includes Carcass chill loss, Cutting yield, chill loss/cutting summary and Boning Hall yield reports.

Presently, the project is in its final phase, which covers the Abattoir operations at both Edenderry and Roscrea, including a centralised slaughter plan and livestock appointments system, weigh-bridge integration, lairage bookings, bulk sequencing, and detained and pig grading stations. Reporting will include a real-time slaughter line monitor program that will accurately display the status of the slaughter with analysis by lot. Slaughter line analysis can be displayed in both tabular and graphical reporting formats.

Commenting on the project, David McMahon, Emydex CEO, said, “We are now well into the final stages of a two-year Emydex systems roll-out across the Rosderra group, covering door-to-door processes as well as integrations to back-office ERP, 3rd party cold stores and suppliers as well as factory floor machinery. Looking back over the two years, I see the project has run smoothly. Both the Emydex and Rosderra project teams worked well together to plan and deliver each project phase on schedule without any major disruption to operations. Rosderra is now reaping the benefits of having a robust factory floor data capture Production control system installed, with Emydex providing group and plant managers and supervisors with real-time and accurate reporting on their Production Yields, Stocks and Traceability.”

Louis Ennis, Rosderra Group Finance and Emydex project sponsor added, “Rosderra Irish Meats Group chose Emydex as an end-to-end solution to replace our legacy system. The installation, which is currently ongoing, will be completed over multiple phases across multiple sites, with all implementations running smoothly and with minimum disruption to the business. The first implementation was the warehouse and packing modules, and, through added interfaces with our ERP system, brought immediate benefit to the business through greater visibility on orders, improved data validation and reduced administration, especially around our cold store loads where manual input has been greatly reduced. Overall, the system greatly improved real-time information and offered ease of use and improved flexibility when making changes”

Request a Demo

Introducing Emydex EQMS – Electronic Quality Management System

The Emydex Electronic Quality Management System (EQMS) has undergone a major redesign and redevelopment over the past 12 months, with significant input from some of Emydex’s largest multi-plant beef, lamb, pork and seafood processors operating in Ireland, the UK, Africa and Australia.

Taking all the learnings and experiences gained from previous Emydex QC system implementations; this latest release of the Emydex QC module is a fully comprehensive and extensive QMS system, designed to cater for the needs of large Enterprise-level food processing organisations.

The system is ideally suited to group-level food processors operating different business divisions, spanning different geographies, offering both real-time and accurate reporting on QC activities, at both group and individual plant-level via the Emydex QC cloud-hosted platform.

Maintain a sky-level overview of QC activities across divisions and operations within the organisation, in real-time

Cloud v On-Premises: In addition to hosting in the cloud, the system can alternately be installed on-premises if required.

Small v Large: It can also cater just as effectively for both small and medium-sized meat, fish and food processing plants, as well as larger production operations.

EMYDEX QUALITY MANAGEMENT SYSTEM DEMO VIDEO

Key features include:

BUILD

QC Workflow Builder: one of the most significant improvements to the Emydex QMS, is a major design and development effort focussed on developing an easy-to-use, yet comprehensive QC workflow builder tool.

This application allows in-house Technical and QC personnel (non-IT people) to design and build their own Quality workflows in-house, including QC surveys, QC check sheets and quality audits, without the need to involve either Emydex developers or internal IT resources.

The result is an easy-to-use, icon-driven workflow builder application, powered by Question Blocks that can be saved as templates, and re-used from one quality survey to the next.

Workflows can include conditional responses such as ‘if the answer is X do A, if Y then B’, and includes Action Plans such as notifying supervisors, generating follow-up actions, sending emails, reminders, notifications, triggering CAPA workflows etc.

Configure QC workflows from scratch. Determine what questions to ask, and how best to capture the information needed.

CAPTURE

QC Workflow Data Capture: once QC workflows have been designed and tested they can be executed on the factory floor. Workflow surveys can be validated by running them in ‘test mode’ in which case, the test transactions are saved separately from ‘live’ QC data.

QC data capture can be carried out using a range of data capture hardware devices including existing fixed-position Industrial terminals, rugged tough-books or even low-cost tablet devices running the Windows 10 operating system.


Capture QC data such as CAPA workflows on low-cost tablet devices running Windows 10


Capture QC data such as Product Quality Checks on rugged Toughbook devices for harsh environments

Emydex Production System Look-up & Validation – One major advantage of the Emydex QC module, is that food processors who have also implemented an Emydex Factory Floor Production Control and Traceability reporting system in their operations, can scan product barcodes, retrieve traceability details, and perform validation from the Emydex QC system against production data stored in their Emydex Production system, something not possible with independent 3rd party QC systems.


Kill line QC inspections – logging QC faults against Carcasses within Emydex Production systems

REPORT

Instant Back-office Reporting via Plant Maps & Dynamic Data Views – whether operating in a single plant or group plant operation, managers and supervisors will have real-time access to QC data captured as it happens.

The QC module plant map drill-downs allow supervisors to ‘manage by exception’ drilling down to the areas where any QC issues or non-conformances are raised, to investigate and raise actions as needed.


Drill-down plant maps enable issues & non-conformances to be identified and actioned quickly

QC Data can also be viewed using Data Grids and Views that can be configured by users themselves, and saved as personal templates; allowing data to be grouped, sorted, filtered, analysed and exported to Word, Excel or Email if needed.

 Customise the way you view results, and decide what information you want to see and when

Emydex Report Writer – Emydex’s QC report writing application can also be used to prepare printed reports that can match exactly the format of the original paper-based QC surveys and check-sheets if required.


Original Paper-based QC Survey

Same QC data presented in similar report format post electronic data capture on an Emydex QC device

Other features worth highlighting include:

Production Calendars

Create multiple production calendars. Outline schedules relative to hours of operation.

Production Schedules

Create Schedules to control what needs to be done and when? Daily, Weekly, Monthly, and Yearly schedules

(1) Pre-production (2) Post-production or (3) During production at set interval checks – you decide

Schedule Workflows

Schedule Workflows with a click of a button. Apply zero, one or many schedules to a workflow as required

Roles & Responsibilities

Assign QC Workflows only to those responsible for them. Assign Actions only to those with the authority to complete them.

Missed Workflow Notifications

Quality System will track missed Workflows. Automatically notify when a workflow is missing or not completed as scheduled.

Organisation

Assign QC Workflows to different Plants, Areas and Roles. Track what needs to be done where?

Equipment


Manage Equipment Lists. Create Preventative maintenance quality checks for equipment.

Actions Console

Log into your personal QC Actions console. Track all your Quality System Actions. See only Actions you are responsible for.

To organise an Online demonstration or request a 30-day free trial of the Emydex QMS System, please get in touch with Emydex on sales@emydex.com or call us via our contact numbers

Request a Demo

Rosie & Jim Value Added Poultry Processor live on Emydex

Dublin – Ireland:
Rosie and Jim was established in 1997 when award winning craft butcher, Jimmy McLoughlin established Quality First Ltd and began producing gourmet chicken products for supply to butcher shops and restaurants. Today the company produces a wide range of premium quality, ready-to-cook gluten free breaded and battered chicken products.  They also produce a variety of delicious filled wraps.  All products are available chilled or frozen.

Order Control

Rosie and Jim approached Emydex in 2016 with a view to implementing a factory-wide Production Control and Traceability Reporting IT system door-to-door. The company had no existing factory floor IT system in place, operating manual processes instead, which meant excessive recording of internal processes manually on paper, which was both laborious and time-consuming, and offered little by way of real-time production control and traceability reporting.

The company had no real insight into the quantity or value of their existing stocks, resulting in procurement planning issues. Unsure of what current stocks were available to fulfil production orders, often resulted in over-ordering of stock, and the holding of excess stock of raw materials, dry goods and ingredients on-site than was needed.

Recipe Formulation

Another issue Rosie and Jim faced from their manual process was knowing how much each production batch cost to produce. Without knowing the precise amount of raw materials and ingredients going into each production batch, and without knowing the exact value of that stock, it was impossible to accurately calculate profit/loss and production yields.

Emydex’s Recipe Formulation Software system means that now, every item is scanned and weighed into a production job in the correct quantities. The system allows Rosie & Jim to track and record every item right down to the smallest measurement that was used in a production job. By doing this, Emydex determines the value of items used in production batches, allowing the system to calculate the cost of each production batch.

Real-Time Traceability Reporting

At Intake, Emydex allocates an internal traceability number (ITN) to each batch of supplier goods received, and the goods are labelled with barcodes and stored. From this point forward, the goods are tracked and traced by factory operators using hand-held scanning terminals, throughout the different stages of production, up to the point of sales order picking and dispatch, This allows for real-time traceability reporting throughout the plant, both for forward trace reporting from suppliers to end-customers, as well as backwards.

Sage Integration

Prior to go-live, Emydex was tightly integrated with Rosie & Jim’s existing Sage 200 accounting system, with Purchase Orders and Sales Orders pulled down from stage, and well as production data sent back to Sage for invoicing of customers and supplier payments.

Go-live

“We started using Emydex on the floor in two separate stages. First, we launched Emydex on our breading line while still using test data. This included the recipe blending and packing. By the end of the first week most of the production team using the system were already comfortable with using it. You could visibly see them speeding up when going through the individual screens.  

We also started to receive goods in from Intake onto the system. This has been simplest of part of the implementation. We soon after went live proper on the 1st of April. We first implemented Emydex on our mixes & tortilla line and began to pick our sales orders via the hand-held scanners. Overall, I feel the project was a successful implementation, and the new system has been well received by our production team, operators and supervisors, better than I could have expected”.

Peter Turner, Financial Controller with Rosie & Jim

Production Reporting

Rosie and Jim now have a comprehensive reporting structure on all aspects of their production processes. The Emydex back-office reporting module provides the company with a number of different views over their cost/value figures including Real-time stock inventory and valuation, Production costing, Production costing variances, Product usage reports, production yield reports and product giveaway reports.

Emydex also worked with Rosie and Jim to develop additional reports such as Production & packing time efficiency reports and daily stock movement reports.

“From a reporting side, by the end of the first week, our production manager and I started to see proper results with regards to yields, packing volumes and stock control. I would like to thank the Emydex team as they really helped, not only with the actual development but also with suggesting practical solutions to suit our processes e.g. line-side management.”

further comments by Peter Turner, Financial Controller with Rosie & Jim

Request a Demo

Emydex Coldstore Management System Live in Dawn Meats UK

Halesowen – England:
Dawn Meats are one of the largest suppliers of Irish and British Beef and Lamb in Europe. They supply premium quality beef and lamb products to over 40 countries worldwide. Since 2007, Emydex software has been Dawn’s system of choice for factory floor data capture, production control, stock management and traceability reporting. Emydex iWAMS has been implemented as the groups standard solution in their 15 production sites located across Ireland, England, Scotland, Wales and France.

Stock Management

In 2014 Dawn Meats bought a 99,000 sq ft distribution center in Birmingham, England for freezing, distributing and storing meat products. The Halesowen facility provides cold storage services for all of Dawn’s manufacturing plants in the UK.
Installed in 2015, the Emydex cold store warehouse system operating at the Halesowen site, provides Dawn Meats with a warehouse management system that manages, controls and reports on all cold storage processes at the plant. These processes include goods inwards, stock palletising, blast-freezing, stock put-away, sales order picking, container loading and order dispatch. In addition, the Emydex platform provides Dawn with the capability to carry out stock transfers, stock takes and stock reconciliation. This in turn provides the business (and entities owning the stock) with real-time accurate reporting of stocks.

Synchronized

Electronic links, which keep the sites Emydex systems synchronized with the Halesowen Emydex system, are in place between the Halesowen cold storage facility and each of Dawn’s production plants in the UK. These links are architected on Emydex’s proprietary ‘E-Transfer’ functionality. This enables the individual sites to send and receive real-time validation and reporting on all stock items shipped into and dispatched out of the cold store. Real-time transactional data on internal stock movements, pallet break-down and sales orders dispatched to customers are also sent via automated electronic E-Transfers.

ERP Integration

“Our requirement was to implement a solution in the Halesowen facility that would meet the needs of a cold storage business whilst also providing the individual sites with visibility into their cold-store stocks and all associated handling and storage costs. In our business model it was important to us that the sites retained the ability to select the individual units they wanted to be picked in order to best meet the needs of each customer.

It was clear that this would require tight integration between the production sites Emydex systems and whatever cold-storage solution was chosen. The Emydex Cold Storage system met most of the requirements of the business as standard. The inherent flexibility within the Emydex platform meant we were confident that we could work with their development team to tailor Emydex to fit our exact needs.

For example, Emydex were able to add functionality to the system to allow for box-level traceability throughout the blast freeze process. For our business, Emydex was definitely the right choice”.

Shane Slattery, CIO with Dawn Meats

Emydex software is integrated with Dawn’s central ERP system. This integration is architected using web-services to allow for complete control over the sales and purchase ordering processes. The ERP integration allows Dawn to draw down sales orders in real-time, manage picking rules, assign sales orders and print customer specific documentation.

Request a Demo

Clogherhead Fishermen’s Co-Op: Labelling at Sea

Fish Processing – Clogherhead Fishermen’s Co-Op

Clogherhead Fisherman’s Co-Op, is a leading Irish Seafood producer based in Clogherhead, Co. Louth, on the East Coast of Ireland. This video describes how Clogherhead Co-Op use Emydex’s Production Management and Traceability software on their fleet of trawlers as well as throughout their processing factory for data capture, labelling of product at sea, landings, into-warehousing, sales order picking and dispatch, providing Clogherhead Co-Op with real-time and accurate Traceability reporting from boat-to-truck.

Emydex’s Labelling at Sea software operating on the fleet of twelve frozen at sea trawlers, enables on-vessel printing, meaning product arrives to shore already labelled, saving time and ensuring full Traceability from the boat to the customer.

<!–Clogherhead Co-Op Video–>

Fish Processing and Traceability

Processing and Traceablility

Project Highlights

“The key for me is that Emydex were able to provide Clogherhead with their standard fish system built in consultation with BIM (Irish Fisheries Board), the SFPA (Seafood Fisheries Protection Agency), as well as the GS1 (Global Standards agency), but allow Clogherhead to tailor and tweak the system to suit our specific needs and processes exactly.
Aside from our old factory floor system, we also previously operated a bespoke-built boat invoicing and payments system.

Emydex were able to configure and build into their standard Fish system, the very same functionality as our previous system, meaning we now have everything we need in a single system, supported in-life by the Emydex support team. After a year at sea, the Co-op that includes the factory and fleet of boats all see the efficiencies and savings realised from our new labelling-at-sea systems”

Paul Boyd, Managing Director – Clogherhead Co-Op

“This project included a first for Emydex, in that our software is now operating on a fleet of boats in an offline environment, but at the same time has proved very successful. Hopefully over time this is something that will be adopted by the fishing industry as a whole”

David McMahon, Emydex CEO

Request a Demo