Careers Contact Downloads |

Food Processing Software Solutions

Software

Home / Archives for Software

Emydex live in Botswana Meat Commission

LOBATSE/FRANCISTOWN/MAUN – BOTSWANA:
Established by the Parliament of the Republic of Botswana in 1966, the Botswana Meat Commission (BMC) procure, slaughter and process beef, as well as beef by-products for sale locally, regionally and internationally. BMC operate three abattoirs in Lobatse (main site and group head-office), Francistown and Maun, Botswana as well as a Tannery and Cannery in Lobatse. BMC also has cold storage facilities in South Africa with marketing subsidiaries in the UK, Germany, Holland and South Africa. Its two abattoirs in Lobatse and Francistown are licensed to sell in the EU as they meet all the EU animal welfare and food safety standards. BMC mostly exports to the EU and RSA.

In October 2014, one of Emydex’s international distributors, deployed the Emydex Packing & Processing Software module to eight Primal packing Industrial workstations in the Botswana Meat Commission’s main beef production plant in Lobatse, Botswana.

New-2

Emydex Primal Weigh-labelling system operating on eight industrial workstations

The Lobatse site is currently deboning 600 beef carcasses per day, producing over 15,000 primal pack labels. Each label is printed in ten separate languages including Arabic and Greek. Primal meat labels are printed with variable text incorporating formatting in compliance with the recent EU Food Allergen Labelling Regulation (EU directive 1169/2011).

Unlike their previous printing system BMC no longer need to define separate label templates for each product with fixed ingredient text. Instead the Emydex Packing system stores ingredient text as a variable against each product, thereby minimising the number of label templates required. BMC production managers and supervisors can identify any Allergens in the label ingredient text and highlight them in bold.

Mandatory country of origin labelling is accomplished by the Traceability recording functionality that is inherent within the Emydex Primal packing and labelling system.

Average label printing cycle time on Emydex factory floor application is 1.2 seconds, with physical label printing speeds averaging 1.8 seconds.

Commenting on the system go-live, Billy Mauco, IT manager with BMC said “Storing primal labels with variable text rather than fixed means we only need to maintain a fraction of the labels we previously supported. The new Emydex system also enables printing of variable labels in ten languages including Greek and Arabic, as well as font formatting, something our previous system could not do. Printing speeds are good, the system is robust and hassle-free.”

David McMahon, Emydex CEO added “one unique aspect of this recent Emydex project in Botswana is that our team managed to configure, test and deploy a BMC-tailored version of our Packing and Labelling software all via the Emydex cloud, without anyone from Emydex visiting Botswana. Ian Carson, one of our International distribution partners, sourced and installed all the industrial hardware required, following which Emydex installed and tested the system remotely in conjunction both BMC staff as well as our distributor. Even though the BMC’s ‘live’ Emydex system is today hosted on a local production server, alternately there’s no reason why it couldn’t have remained hosted in the cloud.”
For more information on the Emydex system click here or contact Emydex on +353 1 8855990

Request a Demo

Euro Quality Lambs are live with Emydex Kill Line & Payments System

SHROPSHIRE-UK:
Euro Quality Lambs Ltd (EQL) is a lamb and sheep abattoir capable of processing 12,500 carcasses a week with onsite boning and further processing facilities. The majority of EQL production is sold in carcass form, both to the UK and throughout Europe.

EQL is one of the largest specialised and dedicated Halal meat processors in the UK.

In 2014 EQL recognized that their ageing production management system was in need of updating in order to satisfy both customer and legislative quality, traceability and veterinary requirements. After a detailed review of market suppliers of meat processing software in both the UK and Ireland, Emydex Technology were chosen to supply a new Lamb kill line system to EQL.

Installed over a number of separate project phases, the Emydex software installed was configured specifically for EQL, by tailoring the Emydex standard Lamb kill line system to deliver functionality from livestock procurement right through to carcass & box dispatch.

Hardware costs were kept to a minimum by reusing the existing scales, printers and barcode scanners. The only new hardware installed (supplied by Emydex industrial hardware partner MWS Ltd) being three new industrial touch-screen computer terminals. A single OCM was supplied to enable labelling of boxes (both offal and primals).

Rizvan Khalid (Senior Director) of Euro Quality Lambs commented “having met the Emydex team and seen all of the product development, project delivery and customer support teams based in Dublin, we felt confident that we could work with Emydex. Since then our project has been implemented in a timely manner, and has met and in some cases surpassed our expectations.” Khalid added “One differentiator with Emydex over the other factory floor systems we evaluated was the ability and ease with which the Emydex system can be modified and configured to work in line with our existing EQL business processes. We had many new ideas that we wanted to incorporate into our new system. The flexibility inherent in Emydex means everything is possible”

Commenting on the installation, David McMahon CEO with Emydex in Dublin said “Rizvan and the management team in EQL had a very clear vision of their system requirements from the outset of the project, that was the automated collection of production data from factory door-to-door, enabling accurate reporting on production yields, quality and traceability information in real-time.”
For more information on the Emydex system click here or contact Emydex on +353 1 8855990

Request a Demo

Allergen Labelling, upgrade to an Emydex Traceability system.

New EU Food Allergen Labeling Regulation

By December 13th 2014 all food labels in EU must identify allergens to comply with the European directive 1169/2011. The goal of the directive is to provide greater clarity to consumers on ingredients, nutrition and allergens. Manufacturers, retailers and food service operators need to clearly highlight food allergens within the ingredients list.

The EU directive 1169/2011 at a glance

Scope of the new regulation

  • Mandatory nutrition information on processed foods;
  • Mandatory origin labelling of unprocessed meat from beef, sheep, pigs and poultry;
  • Highlighting allergens e.g. peanuts or milk in the list of ingredients;
  • Better legibility i.e. minimum size of text: letter x height needs to be at least 1.2mm
  • Requirements on information on allergens also cover non pre-packed foods including those sold in restaurants and cafés.

The 14 substances and products that cause allergies or intolerances

  • Cereals containing Gluten
  • Celery
  • Crustaceans
  • Eggs
  • Fish
  • Nuts
  • Lupin
  • Milk
  • Molluscs
  • Mustard
  • Peanuts
  • Soybean
  • Sesame Seeds
  • Sulphur dioxide and Sulphites

This can be achieved using an Emydex Traceability labelling software system integrated with Nice Labels.

No longer do you need to define separate label templates for each product with fixed ingredient text. Emydex allows you to minimize the number of label templates required by allowing ingredient text to be stored as a variable against each product. The user will identify the allergens in the ingredient text and highlight them in bold text.

Mandatory origin labelling is accomplished by the traceability infrastructure inherent within the Emydex system. Country of Origin (and other traceability data) is recorded at Intake against an Internal Traceability Number (ITN). This ITN number then follows the products through the plant to the labelling process where the country of origin is extracted for printing on the label. When the traceability chain within the Emydex system is not complete (e.g. not full installations), the Country of origin can be selected from a drop down list at the labelling stations.

Example Label showing Allergen Ingredients highlighted in Bold

Example Label showing Allergen Ingredients highlighted in Bold

Just one more reason why Emydex is the correct choice for
real time on-demand labelling applications.

Request a Demo

Emydex sign many of Ireland’s Largest Fish Processors

Exhibiting at the Teagasc Meat@Gateways event being held in Ashtown, Emydex today announce they have signed up several new Fish processing customers in as many months.

Working in conjunction with BIM’s eLocate scheme, designed to encourage seafood enterprises to implement common standards of traceability, labelling and weighing through the implementation of Traceability software systems such as Emydex.

Emydex Fish News

Pictured with Tom Hayes TD, Minister of State at the Department of Agriculture, Food and Marine at the Teagasc – Food Innovation Gateway event are Emydex CEO, David McMahon and Emydex Product Director, James Grennan.

Emydex has so far signed up some of the largest processors in Ireland including Castletownbere Fisherman’s co-op, Glenmar Shellfish,  Goodfish and Eiranova, all located in Co. Cork, the Clogherhead Fisherman’s co-op in Louth, Galway & Aran Fishermans co-operative, Nolans Seafood and Rockabill in Co.Dublin.

Roll-out is well underway in most projects, with the Emydex Production Management System now operational in many seafood processing factories. The Emydex Fish factory system was designed in close collaboration with the GS1 Ireland and BIM, the latter whose aim is to implement barcode labelling and traceability standards across the seafood processing Industries in Ireland, as well as Europe. In addition, Emydex’s labelling at sea system is currently being trialed a number of Trawlers operating in the Irish Sea.

Emydex’s Fish Processing software system is designed to handle all types of seafood processing whether white fish or shellfish, fresh or frozen, and can manage the entire seafood processing supply chain from boats labelling product at sea, to boat landings, 3rd party intake, re-grading, production and processing such as filleting, smoking, labelling, warehousing and dispatch. The system also provides for real-time yield analysis and KPI reporting

The software system can integrate to 3rd party cold stores, financial systems as well as a large range of factory floor hardware devices such as indicator/scales, PC terminals and hand-held scanning devices used for sales order picking and dispatch as well as stock management.

teagasc-logo

More info on the Meat@gateways event can be found here

Request a Demo

Emydex live in MeatCo, Namibia

WINDHOEK – NAMIBIA:
Emydex today announce that their factory floor Data Capture, Production Reporting and Traceability system is now live and operational in MeatCo (Namibia)’s main beef processing plant in Windhoek, the capital of Namibia.

The beef primal deboning system in Windhoek is the first of an eight phase project that will see Emydex systems rolled out across MeatCo’s six beef processing operations in four separate locations in Namibia, as well as integrating Emydex to the Table Bay Cold Store in South Africa.

The two year, Euro 300k contract includes system rollout to Meatco’s two export approved slaughter and boning plants in Windhoek and Okahandja. Both plants are capable of slaughtering up to 1500cattle per day. The naturally grass fed Beef for which Namibia is famous is supplemented with Beef from Meatco’s own feed lot at Okapuka.

The Meat Corporation of Namibia (‘MeatCo’) also operate two further non-export abattoirs owned by the Namibian government but managed by Meatco, in Katima and Oshakati, which will both see Emydex installed. Finally a Wholesale beef processing plant and a cannery (both on the Windhoek site) will operate Emydex’s production management system.

Having pre-configured MeatCo’s customer specific business requirements in Dublin during February, Emydex staff were onsite in Windhoek during the Months of March and April, further configuring and customising the Emydex system to comply with the local market requirements of Meatco’s main export plant.

Phase one of the Windhoek project covered the carcass chills, carcass dispatch, boning hall, primal and carton packing, finished product stock, carton dispatch and integration to Meatco’s Sage X3 ERP system. Emydex are currently working on the Meatco Wholesale plant in Windhoek, soon to be followed by the Cannery and finally the Windhoek Beef slaughter line.

The company are targeting September 2014 as a likely roll out date for Windhoek system into Meatco’s second export plant in Okahandja.Due to the inherent flexibility and usability of the Emydex system Meatco are planning to roll out the Emydex system in the Oshakati and Katima abattoirs themselves,with remote support from Emydex as needed.

Commenting on the first phase of the Emydex system roll-out, AndriesTaljaardt,Meatco’s Windhoek Plant Manager said

“While slaughter continues uninterrupted, system upgrades are currently being effected at our Windhoek abattoir to improve the effectiveness of operations and maximise output in order to cater to growing customer demands.

Because of these demands, and the fact that preferences and specifications are continuously changing, we have to move into the direction which the market is moving. We have installed a new Production Management Software System (Emdyex) and layout in our Windhoek abattoir deboning department, which allows for a lot of value addition to our products. The Emydex system controls the volumes and all the information on the deboning floor and is responsible for the production recons and the labelling of products.

With the new layout, we have introduced an additional vacuum line and an additional frozen line. With that, we can now put up to 420 carcasses through deboning per day within normal working hours. For May, we are looking to put more than 6600 carcasses through deboning. Round about June, once the system is fully implemented, the number of carcasses we want to put through deboning is about 7000.”

In addition Andries said “We chose Emydex given it is a highly technological system that is used in many international abattoirs that adhere to European Union standards. Meatco is a pioneer in quality standards compliance in Namibia and is one of the first companies to achieve certification for international standards like ISO 9001 and HACCP.”

Commenting on the Emydex system roll-out, Nico Weck, Group Chief Financial Officer at the MeatCo group said “since implementing Emydex’s shop floor barcode labelling and scanning system at our Windhoek primal deboning operations, our managers now have instant access to accurate reporting on our Yields, Stocks and Traceability”.

Request a Demo

Arthur Mallon’s fully operational with Emydex

Mallons Brand

Arthur Mallon Foods specialise in the production of fresh, frozen and cooked sausages. They supply fresh and frozen pork, to the major Irish retailers and export frozen pork sausage to Holland. Mallon’s sausages have won multiple awards in Ireland, UK and France and have achieved two Great Taste Awards in 2012. They operate from a purpose built modern production facility in Hilden, Co. Monaghan.

Arthur Mallon Foods identified a requirement to upgrade their existing production management systems to a single production management system that was scalable and flexible to meet with growing demands for specific industry, customer and supplier requirements. They required a single system to manage and report on order control, stock control, recipe formulation, traceability, quality control and yield control. With these objectives in mind they contacted Emydex in 2012.

Phase 1 – In order to minimise disruption to normal day operations, the project was split into a number of smaller project phases. Starting at the end, in Phase 1 Emydex customised their Packing & Processing module to suit Mallon’s particular needs including features such as Unit, Box and Pallet Labelling. Packing stations allow operators to work to Packing Work Orders whilst enabling them to switch quickly between Work Orders.

As part of this same project phase, Emydex’s Warehouse Management module covering Dispatch was implemented ‘off-the-shelf’ with only a few tweaks required to meet their particular requirements. “The key point about Emydex software is the standard module offerings are very comprehensive and cover almost everything we need, and if they don’t have specifically what we need, it’s not a major hassle to change it” said Paul Kearney in Arthur Mallon Foods.

In parallel with the Emydex factory floor install

Mallons also upgraded their ERP system, and Emydex integrated seamlessly with this. Sales orders are keyed into their financial system and then sent directly to Emydex for order picking and dispatching. Purchase orders are generated within Emydex, and then exported to the financial system upon receipt of goods.

Phase 2 of the project covered Raw Material and Dry Goods Intake, as well as Issuing Stock into Production via handheld scanners to ensure stock levels are accurately maintained.

Phase 3, Emydex’s Recipe formulation system is currently being implemented, and about to go-live. This module will track and control the levels of ingredients being issued to recipes as well as the calculating yields from finished recipes. Implementing the recipe system will assist Arthur Mallon’s with Quality Control and Traceability reporting, as well as provide key information in real-time to the floor managers as to the performance of the line.

“Already we are seeing the advantages of having Emydex as well as the capabilities and possibilities for the future. With the software and the excellent backup and service from all the staff in Emydex we feel we have the complete package.” Paul Kearney
For more information on the Emydex system click here or contact Emydex on +353 1 8855990

Request a Demo